23PC Front Wheel Drive Bearing Press Puller Removal Installer Adapter Kit w/Case

Description

Product Description
Tips:
You may receive a Black or Blue case, we send by random, but it won't affect the function, thank you for your understanding
Application:
fits front wheel drive cars and small trucks
Material: Forged carbon steel, BMC for storage.
Operation:
Step.1
Determine if the vehicle has a trapped rotor or a floating rotor.
Step.2
Assemble the tool components, and press out the worn bearing.
Step.3
Lightly lubricate the new bearing, and position it for installation with the tool components assembled. Press the bearing into the spindle assembly until it bottoms.
Step.4
Fasten the bearing retainer in place using the bearing retainer bolts. (On Neon vehicles, install the snap ring in the knuckle.)
Step.5
Assemble tool components. Lightly oil the hub assembly, and install the hub. Attention: The bearing installer must be assembled with the flat side toward the bearing and the small diameter pilot on the side away from the bearing.
Step.6
Assemble the remaining vehicle components that were removed for bearing replacement: (1)lower ball joint to steering knuckle assembly brake rotor. (2)disc brake caliper. (3)outer tie rod nut and tie rod. (4)axle nut. (5)front tires.
Sleeve [A-D]:
A - 4.03"(102.25mm) O.D. x 2.55"(64.65mm) Length
B - 3.61"(91.68mm) O.D. x 2.55"(64.65mm) Length
C - 3.41"(86.66mm) O.D. x 2.55"(64.65mm) Length
D - 3.00"(76.23mm) O.D. x 2.55"(64.65mm) Length
Washer [E]:
E - 1.52"(38.6mm) O.D. & 0.91"(23mm) I.D.
Bushing [F-Q]:
F - 2.16"(54.92mm) O.D. x 0.55"(14.01mm) Thickness
G - 2.32"(58.93mm) O.D. x 0.55"(14.01mm) Thickness
H - 2.48"(62.95mm) O.D. x 0.55"(14.01mm) Thickness
I - 2.62"(66.49mm) O.D. x 0.55"(14.01mm) Thickness
J - 2.75"(69.75mm) O.D. x 0.55"(14.01mm) Thickness
K - 2.81"(71.41mm) O.D. x 0.55"(14.01mm) Thickness
L - 2.89"(73.46mm) O.D. x 0.55"(14.01mm) Thickness
M - 2.95"(75.00mm) O.D. x 0.55"(14.01mm) Thickness
N - 3.05"(77.55mm) O.D. x 0.55"(14.01mm) Thickness
O - 3.21"(81.46mm) O.D. x 0.55"(14.01mm) Thickness
P - 3.28"(83.25mm) O.D. x 0.55"(14.01mm) Thickness
Q - 3.48"(88.34mm) O.D. x 0.55"(14.01mm) Thickness
Wheel Hub Installer [R]:
R - 2.87"(72.93mm) O.D. x 0.79"(20.02mm) Thickness
Sleeve Plate [S-T]:
S - 4.03"(102.38mm) O.D. x 0.71"(18.03mm) Thickness
T - 3.39"(86mm) O.D. x 0.71"(18.03mm) Thickness
Sliding Forcing Screw [U]:
U - 1.26"(31.95mm) Hex x 8.27"(210mm) Length
Sliding Forcing Nut [V]:
V - 1.25"(31.81mm) Hex x 2.36"(60mm) & 0.78"(19.75mm) I.D.