Car Engine Brake Cylinder Hone Flex Shaft Bore Honing Tool 51mm-177mm Wide

Description

Car Engine Brake Cylinder Hone Flex Shaft Bore Honing Tool 51mm-177mm Wide
Introduction:
For deglazing engine cylinders 2 inches to 7inches in diameter
Durable flex shaft, for removing rust deposits on older rebuilts
Knurled wheel adjusts spring pressure of stones against cylinder bore
3 inches X 3 inches Leg Motor Adjustable Cylinder Hone Piston Tools
Removes carbon and heat glaze deposits on cylinder bores.
Features:
Removes carbon and heat glaze deposits on cylinder bores.
Excellent for removing rust deposits on older re- builds.
Fits cylinders from 2 inches to 7 inches capacity Selector ring switches between bore ranges.
Fitted with 3 inches x 3 inches medium grade stones
Specifications:
Dimension:2 to 7 in. Diameter range (51 – 177 mm)
Setting:2 through 4 in. and 4 through 7 in.
Stones:3 – 220 Grit
Length of Stone:7.62cm (3 inches)
Operation:
Step 1.
Spray lubricant on the stones or the cylinder bores. Get the hone set up on the drill.
Step 2.
Insert the engine hone into the cylinder and run the drill at low speed between 300-700 RPM. Move the hone up and down around once a second.
Don't push or pull the stones more than 3/4 inches out of the cylinder. Don't run the engine hone for more than 3 mins.
Step 3.
After honing, use a paper towel to wipe out the inside of cylinder.
Honing Stones
Medium 220 grit stones enable faster and  smoother removal of deposits and corrosion in engine, brake and all types of cylinders.
Flexible Shaft
The honing tool with self-centering flexible shaft does the deglazing job efficiently.