Harmonic Damper Pulley Holding Tool Crankshaft Crank Holder For Toyota Lexus

Description

Fitment:
Fit for Lexus 1990-later: 3.0 L6, 3.0 t V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8. Fit for Toyota 1996-later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7. Fit for 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ.
Application:
Help to remove and install the crank bolt on engines, so the removal of extremely tight bolt is no longer a trouble.
Superior Quality:
Constructed from high quality 40Cr steel to provide enough strength and durability, this tool's powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure.
Easy To Use:
DR-Auto
Your Best Auto Business Partner
Harmonic Damper Pulley Holding Tool Crankshaft Crank Holder Removal Wrench Tool Fit for Toyota Lexus
Fitment:
Fit for Lexus 1990-later: 3.0 L6, 3.0 t V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8. Fit for Toyota 1996-later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7. Fit for 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ.
Application:
Help to remove and install the crank bolt on engines, so the removal of extremely tight bolt is no longer a trouble.
Superior Quality:
Constructed from high quality 40Cr steel to provide enough strength and durability, this tool's powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure.
Easy To Use:
Use with a inch drive impact wrench and a 22 MM impact socket to spin out the crank bolt. When installing the pulley, you need to bolt the Pulley Holding Tool to the pulley with the two provided bolts, plug a drive breaker bar into the tool and orient the breaker bar up inside the engine compartment, and then torque the crank nut.
Satisfaction Guarantee:
If you're not 100% satisfied with Sunluway Holding Tool, simply return it for a full refund in 60 days. Premium Support & 2 Years' Warranty.
Product Description:
Wanna Save Energy and Time When Removing and Installing the Crank Bolt?
DR-Auto tool is a lifesaver if you work on engine timing belts or just need to remove the crankshaft pulley.
Fitment:(Please verify your car model and year before purchase)
Fit for Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8
Fit for Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8
Fit for 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ
Material:
Heavy duty steel holding tool and bolts with washers, allow the 280 pounds of torque to be attained
Feature:
1.Factory specifications require up to 280 pounds of torque to seat the pulley properly, and our tool allows the factory torque to be attained.
2.Hole in the center of holding tool allows access to the removal of crank shaft bolt.
3.Low profile design, no need to remove radiator or other components to access and remove Harmonic Damper Pulley.
4.Offset breaker bar attachment point allows easy removal and replacement of crank shaft bolt to factory torque specifications.
Package includes:
1*Harmonic Damper Pulley Holding Tool
2* bolts & 2 washers
Warranty:
2 Years'
Item Specifics
Brand
DR-Auto
Manufacturer Part Number
DRQP748
Type
Harmonic Damper Pulley Holding Tool
Warranty
2 Year
Fitment
For Lexus & Toyota
Color
Black
Material
40Cr steel
UPC
Does not apply
Payment
1. Payment methods accepted:
Paypal only
.
Our Paypal account allows you to pay by credit card, debit
card and your Paypal balance.
2. All major credit cards are accepted through our secure payment processor Paypal.
3. Payment must be received
within 7 business days
of auction ending.
4. We ship items to Your Paypal address.Please make sure your Paypal
address is correct
before you pay, cause it cannot be changed once the order shipped out.
Shipping
1. Item will be shipped to buyer's PayPal shipping address
within 1-3 business day
after clear payment received.
2. Please make sure shipping address on your PayPal account is
correct & up-to-date.
3. All of our items are shipped from our  warehouse.
4. Please feel free to contact us by email if you cannot get your order in time.
Please read the shipment and payment detail carefully before you bid.
Returns
1. Return to us
within 30 days
from the delivery date for exchange or refund.
Refund will be given as Money back
or item exchange (buyer's choice).
2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake
.
And all NON-seller mistake returns for refund are subject to
10 % re-stocking fee.
3. If you need return, please
contact
our customer service representative,
let us know the detailed problem and
end us some pictures for confirmation.
Contact Us
We
maintain high standards of
excellence Four 5-star
rating
and strive for
100%
customer satisfaction! Positive Feedback
is very important to us. If you are not satisfied with our product or our Service,please feel free to contact us
immediately BEFORE you leave neutral
or negative
feedback, we will try our best to resolve any problem and make you satisfied.
Please contact us via ebay using"Contact member".
We will respond within 1 business day
or less.Thank you for your understanding.
Our office hours is as below :
- 9:00 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday
- 9:00 a.m. to 1:00 p.m. (GMT +8) of Saturday
And our office is closed on Sunday and public holidays (Hong Kong)
We apologize for the late reply during the holidays.Please contact us via ebay using"Contact member".
We will respond within 1 business day or less.
Please include your ebay item numberor order number in
all communications.
DR-Auto
Your Best Auto Business Partner
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Shop Category
Store Home
New Arrival !
Engine Tool
Car & Truck Accessories
Generator Accessories
◈  Gas Cap Adapter
◈  Generator Tool Kit
◈  Other
Tool
◈  Home & Garden
◈  Bearing
◈  Engine Tool
◈  Oil Filter Cap
◈  Other
Tail Light Covers
◈  Other
Pool Lights
Parking Reverse Camera
Sunshade & Windshield
Mixed Hand Tool Sets
Car Keys Fobs & Remotes
Jeep Grand Cherokee
Seat Covers
JK Full Set Interior Decorate
Ford Mustang
Boat Parts
Blacksmithing
Other
Hot Accessories
Camshaft Holding Tool Cam Holder Retaining Tool Kit J-44221 For GM IN-LINE 6 CYL
USD 22.40
Camshaft Holding Tool Kit Timing Holder Tool Set For Ford 3.5L 3.7L 4V Engines
USD 34.98
6695 Axle Shaft Seal Installer Tool Fits For Ford 1998-2004 F-250/350/450/550
USD 64.79
Camshaft Holding Tool Cam Holder Retaining Tool Kit J-44221 GM IN-LINE 6 CYL
USD 22.40
J-38587-A Engine Barring Socket For Caterpillar 3200/3406 Series C13/C15/C16
USD 39.50
New Arrival
Camshaft Holding Tool Kit Timing Alignment Holder Tool Set for Ford 3.5L 3.7L 4V
USD 35.00
Hi Lift Jack Mount Hood Hinge Door Hinge Bracket for Jeep Wrangler JK 2007-2018
USD 44.09
NEW Back Up CCD Rear View Reverse Parking Camera for Toyota 4Runner 2002-2010
USD 22.40
Oil Filter Wrench Cap Tool For 4-cylinder Toyota Corolla Prius Matrix Highlander
USD 9.80
Car Windshield Sunshade for 1985-2020 Jeep Wrangler JL JK TJ LJ YJ Sun Visor
USD 20.60
Auto Tool
Camshaft Holding Tool Kit Timing Alignment Holder Tool Set for Ford 3.5L 3.7L 4V
USD 35.00
Hi Lift Jack Mount Hood Hinge Door Hinge Bracket for Jeep Wrangler JK 2007-2018
USD 44.09
Can-Am Maverick Commander Defender Front&Rear Wheel Bearing Greaser Service Tool
USD 21.50
J-38587-A Engine Barring Socket For Caterpillar 3200/3406 Series C13/C15/C16
USD 39.50
Valve Spring Compressor Tool Fit for Ford 4.6L 5.4L 6.8L 3V, Similar to OTC 6684
USD 33.29
Harmonic Damper Pulley Holding Tool Crankshaft Crank Holder Removal Wrench Tool Fit for Toyota Lexus
Fitment:
Fit for Lexus 1990-later: 3.0 L6, 3.0 t V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8. Fit for Toyota 1996-later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7. Fit for 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ.
Application:
Help to remove and install the crank bolt on engines, so the removal of extremely tight bolt is no longer a trouble.
Superior Quality:
Constructed from high quality 40Cr steel to provide enough strength and durability, this tool's powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure.
Easy To Use:
Use with a inch drive impact wrench and a 22 MM impact socket to spin out the crank bolt. When installing the pulley, you need to bolt the Pulley Holding Tool to the pulley with the two provided bolts, plug a drive breaker bar into the tool and orient the breaker bar up inside the engine compartment, and then torque the crank nut.
Satisfaction Guarantee:
If you're not 100% satisfied with Sunluway Holding Tool, simply return it for a full refund in 60 days. Premium Support & 2 Years' Warranty.
Product Description:
Wanna Save Energy and Time When Removing and Installing the Crank Bolt?
DR-Auto tool is a lifesaver if you work on engine timing belts or just need to remove the crankshaft pulley.
Fitment:(Please verify your car model and year before purchase)
Fit for Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8
Fit for Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8
Fit for 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ
Material:
Heavy duty steel holding tool and bolts with washers, allow the 280 pounds of torque to be attained
Feature:
1.Factory specifications require up to 280 pounds of torque to seat the pulley properly, and our tool allows the factory torque to be attained.
2.Hole in the center of holding tool allows access to the removal of crank shaft bolt.
3.Low profile design, no need to remove radiator or other components to access and remove Harmonic Damper Pulley.
4.Offset breaker bar attachment point allows easy removal and replacement of crank shaft bolt to factory torque specifications.
Package includes:
1*Harmonic Damper Pulley Holding Tool
2* bolts & 2 washers
Warranty:
2 Years'
Payment
Shipping
Returns
Contact Us
1. Payment methods accepted:
Paypal only
.
Our Paypal account allows you to pay by credit card, debit
card and your Paypal balance.
2. All major credit cards are accepted through our secure payment processor Paypal.
3. Payment must be received
within 7 business days
of auction ending.
4. We ship items to Your Paypal address.Please make sure your Paypal
address is correct
before you pay, cause it cannot be changed once the order shipped out.
1. Item will be shipped to buyer's PayPal shipping address
within 1-3 business day
after clear payment received.
2. Please make sure shipping address on your PayPal account is
correct & up-to-date.
3. All of our items are shipped from our  warehouse.
4. Please feel free to contact us by email if you cannot get your order in time.
Please read the shipment and payment detail carefully before you bid.
1. Return to us
within 30 days
from the delivery date for exchange or refund.
Refund will be given as Money back
or item exchange (buyer's choice).
2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake
.
And all NON-seller mistake returns for refund are subject to
10 % re-stocking fee.
3. If you need return, please
contact
our customer service representative,
let us know the detailed problem and
end us some pictures for confirmation.
We
maintain high standards of
excellence Four 5-star
rating
and strive for
100%
customer satisfaction! Positive Feedback
is very important to us. If you are not satisfied with our product or our Service,please feel free to contact us
immediately BEFORE you leave neutral
or negative
feedback, we will try our best to resolve any problem and make you satisfied.
Please contact us via ebay using"Contact member".
We will respond within 1 business day
or less.Thank you for your understanding.
Our office hours is as below :
- 9:00 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday
- 9:00 a.m. to 1:00 p.m. (GMT +8) of Saturday
And our office is closed on Sunday and public holidays (Hong Kong)
We apologize for the late reply during the holidays.Please contact us via ebay using"Contact member".
We will respond within 1 business day or less.
Please include your ebay item numberor order number in
all communications.
All right reserved.