J-35686-B Front & Rear Seal Wear Sleeve Installer For Detroit Diesel Series 60

Description

APPLICATION -- Works on Detroit Diesel Series 60, two cycle 92 engines. Used to install multiple Seal & Wear Sleeve Assemblies including 23516969 23513578 23513485 23518355
QUALITY -- Heavy duty J-35686-B Seal & Wear Sleeve Installer for Detroit. Manufactured from quality steel, using top of the line machining and measuring equipment to ensure each part is manufactured to OEM specifications.
ADVANTAGE -- This tool is easier to use due to a simpler design. Protect your engine by preventing wear sleeve lip flare by using our low-priced but Quality installation tools.
BENEFITS -- This tool set installs the front and rear crankshaft wear sleeves and seals. It eliminates lip flare on the wear sleeve and installs the seal properly.
Prevent seal leakage !
WHAT YOU GOT -- J-35686-B Seal and Wear Sleeve Installer. Direct replacement for J-35686-B, J-35686 and J-35686-A
✔ Fitment:
For use on Detroit Diesel Series 60 and two cycle 92.
Use on seal # 23516969 23513578 23513485 23518355
✔ FEATURES:
For use on Detroit Diesel Series 60 and two cycle 92
Direct replacement for J-35686-B, J-35686 and J-35686-A
Installs front crankshaft seal
Installs front crankshaft wear sleeve
12 months warranty!
✔ Function:
Install old seal p/n- 23513485 and new seal p/n- 23518355 front seals and p/n 23516969 & 23513578 rear seal and wear sleeve.
✔ Instruction
1. Lubricate the rubber outer diameter of the oil seal with clean engine oil. Lubricate the gear case cover or flywheel housing bore with clean engine oil.
2. Install two guide studs (J–35686–2) through the holes provided in the center guide assembly (J–35686–1) and into two of the tapped holes in the crankshaft 180 degrees apart. Tighten the guide studs. The base must be tight against the end of the crankshaft.
3. Install the spacers to the center screw of the base.
4. Slide the oil seal assembly over the installer base as far onto the crankshaft hub as possible. Slide collar with the stepped side contacting the seal. Slide the installer cup over the guide studs and installer base.
5. Lubricate the center screw of the base with extreme pressure lubricant. Install the thrust bearing with the case side toward the installer cup and install the hex nut to the center screw of the base.
6. Tighten the hex nut until the oil seal and wear sleeve are pressed into the flywheel housing or gear case cover.
7. When the inside surface of the housing is seated firmly against the base and spacers the seal and sleeve are properly installed. Remove tools.
Payment
We accept PayPal payment only.
Shipping Policy
Orders will be ship out within 1-2 business days after payment has cleared. Orders from Saturdays, Sundays or holidays will process on next business day and will be ship within 24 hours. Please allow 10-30 days for international deliveries. Some shipments could take longer subject to your local customs authorities.
United states
2-5(days)
Return & Warranty
Any defective items received can be replaced or refunded. Please contact us with the item number, eBay ID and defect description within 7 days after the date of package arrived.
No Claim will be accept after 7 days.
About us
We, running a family-owned business,
is committed to providing the best quality products, competitive prices and services beyond customer expectations.
Our company began in 2
009
and we mainly sell professional tools, auto parts and decoration. We also provide added-value to our business customers.
We believe customers in today's market are more demanding than ever and they deserve the best!
Contact us
If you have any questions, please feel free to email our service specialists 24 hours a day, 7 days a week. We will reply you ASAP
, but there may be some delay during weekends or holidays.
About Feedback:
If you are not satisfied for any reasons, please do not be so quick to leave negative/neutral feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problems for you and always leave positive feedback to all our customers.
If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 scores DSR. Thanks!